Storage & Removal Boxes Banner
Small Seal Plastic Bags: Sizes, Gauges and UK Uses

Published on : 14 November 2026

Small Seal Plastic Bags: Sizes, Gauges and UK Uses

You've just tipped out a drawer to find one screw, and instead you've got screws, earring backs, cable ties and loose beads rolling together because everything went into one thin bag that split at the corner. That small mess is usually a specification problem, not a tidiness problem. Pick the right size, gauge, material and closure for the item in front of you, and small seal plastic bags stop mixing, tearing and disappearing.

What Small Seal Plastic Bags Are and Why Specs Matter

Say you're sorting a tray after dismantling a flat-pack unit. There are cam locks, short screws, longer bolts, two Allen keys and, somehow, three earring backs that were on the same dresser. If you drop them all into one oversized bag, the heavy bolts settle at the bottom, sharp screw tips press into the film, and the tiny backs hide in the folds. If the bag is too thin, it splits. If you leave it open because the seal won't reach, everything mixes again.

A small seal plastic bag is a flat, small polythene or polypropylene bag with a sealed base and a top closed by a self-seal strip, a press-to-close zip or a heat seal. Most sit roughly between 40 mm and 250 mm in their quoted dimensions. You use them for storage, protection and sorting, rather than for carrying shopping.

Why Each Specification Changes Performance

Size controls movement. Too much spare space lets parts shift, collide and hide. Too little space strains the closure.

Gauge controls strength. Thicker film resists punctures from screw threads and sharp edges for longer, but it feels stiffer in your hand.

Closure controls access. A zip suits items you'll check repeatedly. A heat seal suits items you want closed until they're opened deliberately.

Not a Carrier Bag

Don't confuse this category with a regulated carrier bag. Carrier bags are open-ended and have handles. Small seal bags are sealed and generally have no handles. That physical difference matters in England, where the government carrier bag charge data for England sets the statutory charge at at least 10 pence, including VAT, for an unused plastic bag no more than 70 microns thick that has handles and an opening without being sealed.

The charge was extended to all businesses on 21 May 2021, but it tests those physical features, not whether something is plastic. In this guide you'll work through a size chart, gauge bands, materials, matching bags to items, safety checks, labelling and storage, and UK disposal. If you're in a hurry, the size chart in the next section is your fastest route to a size, and the specification table in the matching section gives you the fastest match to a specific item.

Quick-Reference Size Chart for Common Bag Sizes

Start with the chart, then check your item against the measuring rules below it. These are nominal sizes, so treat them as a starting point for sorting rather than a guarantee of usable space.

Nominal size Typical contents Usual gauge band
40 x 60 mm (1.5 x 2.5 in) Earring backs, single rings, tiny findings Light to standard
60 x 80 mm (2.5 x 3.25 in) Screws, beads, small electronic parts Standard
75 x 100 mm (3 x 4 in) Mixed fasteners, buttons, short fixings Standard to medium
100 x 150 mm (4 x 6 in) Powder or fabric samples, short cables Standard to medium
130 x 185 mm (5 x 7.25 in) Small hardware kits, tools, instruction packs Medium
180 x 235 mm (7 x 9.25 in) Folded documents, small accessories Medium to heavy

Nominal Size Is Not Usable Size

Suppliers usually quote the flat width by height of the bag. The seal, zip track and any fold-over flap use part of that height, so the usable internal area is smaller than the headline figure. A bag that looks exactly document-sized on paper may force you to fold a corner once the closure is accounted for.

Allow around 10 to 15 mm of clear margin beyond the item's largest dimension. That margin lets the two sides of film meet flat, so the seal closes without being pulled open by the contents. If you have to force the zip tracks together, the bag is too small, even if the item technically fits inside.

Practical rule: Measure the item as you'll actually pack it, with caps, fasteners, folded cable ends and protruding wire included, not just the neat main body.

How to Measure Before You Buy

Lay the item flat and measure its longest point and its widest point. For a coiled cable, measure the coil as a bundle, including the connector that sticks out. For a set of screws, spread them in a single layer at roughly the thickness they'll sit in the bag, because a deep pile pushes the film outward and shortens the effective height.

Check thickness as well as outline. A flat bag has no gusset unless the specification says so, so a bulky item borrows width from both sides as the film wraps around it. That's why a chunky padlock can fail to fit a bag whose flat dimensions look generous.

Long, Thin and Awkward Items

Long, thin items need length, not width. Cable ties, drill bits, knitting needles and wire clips slide around in a square bag, bunch at one corner and can poke through the film. Choose a narrow bag whose length matches the item, or use a tube-style bag where the shape suits it. Less spare film means less movement and less wasted drawer space.

Nominal sizes also vary between suppliers by a few millimetres, and tolerances matter when you're buying in bulk for a repeated kit. Check the supplier's dimension sheet and, if you can, test one bag with the actual contents before you order a full box. For a direct pairing of item types to size, gauge and closure, use the matching table further on.

Thickness Gauge Bands and What the Numbers Mean

You can't judge thickness reliably by feel. Two clear bags can look almost identical in a drawer and still behave very differently once you load them with steel fasteners. That's why the numbers matter.

Microns, Mils and the Conversion

In UK packaging, thickness is normally quoted in microns, which are thousandths of a millimetre. Older suppliers and some US sources use mils, which are thousandths of an inch. 1 mil equals 25.4 microns.

That gives you two useful anchors. A 50 micron bag is about 2 mil. A 100 micron bag is about 4 mil. If a listing gives you only one unit, convert it before you compare it with another supplier's listing, or you'll think you're comparing like with like when you aren't.

Gauge band Thickness (microns) Approx. mil Typical use
Light 25 to 50 1-2 Jewellery findings and small parts stored indoors
Standard 50 to 75 2-3 Screws, beads, samples and general storage
Medium 75 to 100 3-4 Fasteners, tools and documents
Heavy 100-150 4-6 Sharp-edged parts and repeated opening
Extra heavy 150 and above 6 and above Rough handling and sharp or heavy items

What Thicker Film Gives You, and What It Costs

Thicker film resists punctures and tears, survives repeated opening better, and copes with sharp or heavy parts that would worry a light bag. The corners hold up longer, and the seal area is less likely to stretch out of shape.

The trade-off is real. Thicker bags usually cost more, feel stiffer, and don't fold as neatly into a small drawer. On some heat sealers they need more heat or a longer dwell time to seal cleanly, so a setting that worked for a standard bag may give you a weak, patchy seal on a heavy one. Test and pull-check the seal rather than trusting the machine's previous setting.

Where Light Bags Fail

A light gauge bag holding a sharp-tipped drill bit or a heavy steel fastener will often split at the seal or corner, because that's where the load concentrates when the bag is lifted. Thin bags wider than about 100 mm can also crease and tear along the seal line when they're loaded with metal, since the wider mouth flexes more.

You have two fixes. Move up a band, or double-bag so the inner bag contains the sharp points and the outer bag takes the handling. Double-bagging is a sensible short-term answer, but if you're packing the same kit repeatedly, the heavier single bag is tidier and easier to label.

Always check the supplier's stated gauge rather than trusting the feel of the film. Aclear bag that feels crisp can be thinner than a softer one, because stiffness comes from the polymer as well as the thickness.

Pick the band for the heaviest or sharpest item in the bag, not the lightest. The lightest item never causes the failure.

Material Types and Their Trade-Offs

The four films below cover most small seal bags you'll meet. They differ in flexibility, clarity, stiffness and how they seal, so the same size and gauge can behave quite differently depending on the polymer.

A comparison chart showing the material types, trade-offs, and typical uses for LDPE, HDPE, PP, and PVC plastic bags.

Material Typical feel Best for Watch-out
LDPE (low-density polyethylene) Soft, flexible, clear Zip and seal bags for jewellery and general parts Stretches and tears more easily under load
HDPE (high-density polyethylene) Stiffer, slightly opaque Heavier parts and repeated use Less pliable at the seal
BOPP (biaxially oriented polypropylene) Crisp, glossy, clear Samples and presentation packs Brittle at corners; often needs a heat-seal coating
CPP (cast polypropylene) Soft, clear, heat-sealable Sample bags and retail items Check food-contact suitability separately

Reading the Table in Practice

LDPE is soft, flexible and heat-sealable, which suits zip and seal bags for jewellery and general parts. It drapes around irregular shapes instead of fighting them. Its weakness is stretch. Under a heavy load it can thin out at a corner and tear, so don't ask a light LDPE bag to carry a fistful of bolts.

HDPE is stiffer and more opaque, with better puncture resistance for heavier parts. That stiffness helps the bag keep its shape in a parts bin, but it's less pliable at the seal. Press closures can feel less forgiving, and a badly aligned zip is more likely to stay slightly open.

BOPP is crisp, clear and glossy, so it suits presentation and card-like samples where you want the contents to look sharp. It's brittle at the corners, though, and it generally needs a coated or heat-sealable layer to close properly. Drop a loaded BOPP bag on a hard floor and the corner is the first place to check.

CPP is soft, clear and heat-sealable, which suits sample bags and retail items. Don't assume food-contact suitability from the polymer name alone. Check it separately against the supplier's declaration for that exact film and use.

Static and Corrosion Are Separate Problems

Plain plastic can build up static as parts move against it, and electronic components don't tolerate that well. Specify an anti-static film for boards, chips and sensitive assemblies, and think about the padding around them too. If you're protecting a component in transit rather than just sorting it, Anti-Static Small Bubble Wrap Rolls address the cushioning side of the same problem.

Metal parts stored for months present a different risk. Plain polythene slows handling damage, but it doesn't stop humidity reaching the surface, so bright steel can still dull or rust in a damp garage. For long storage, consider a multi-layer film or a corrosion-inhibiting bag, and keep the storage box itself dry.

What to Ask the Supplier

  • Polymer type: LDPE, HDPE, BOPP, CPP, or a stated anti-static or corrosion-inhibiting film.
  • Gauge: The figure in microns, not just a word such as heavy duty.
  • Seal strength: Whether the seal is tested, and how it behaves under the load you intend.
  • Closure type: Zip, self-seal strip or plain film for heat sealing, with the usable height after closure.

Matching Bags to Parts, Jewellery and Samples

The table below pairs common item types with a size, gauge band and closure. Use it as your starting specification, then adjust for the actual weight, sharpness and value of what you're packing.

7" x 9.25" (180mm x 235mm) Bubble Pouches (Box of 300)

Item type Recommended size Gauge band Closure
Jewellery (chains, rings, earrings) 40 x 60 mm to 60 x 80 mm Light to standard Zip or self-seal
Small screws, bolts and fittings 60 x 80 mm to 100 x 150 mm Standard to medium Zip or self-seal
Electronic components 60 x 80 mm Standard, anti-static film Zip
Product samples (powders, swatches) 100 x 150 mm Standard Heat seal or zip
Hardware kits and small tools 130 x 185 mm Medium Zip
Documents and instruction sheets 180 x 235 mm Medium Self-seal

Choosing a Closure

Self-seal strips are quick and need no equipment. Peel, fold, press, and you're done. They suit documents and kits you don't plan to reopen often, because the adhesive loses grip after repeated opening and picks up dust.

Press-to-close zips can be reopened many times, so they suit items you check regularly, such as a working set of fasteners. Run your fingers along the full track twice. A zip that feels closed at one end can still gape in the middle.

Heat seals give a permanent, tamper-evident closure. They need a sealer and a film that seals at your machine's setting, so you gain security and lose convenience, because opening means cutting the bag.

Where a flat bag gives sorting with little impact protection, a padded pouch may be the better format. You can browse 5x7 bubble bags for that middle ground. For larger contents, the 7" x 9.25" (180mm x 235mm) Bubble Pouches (Box of 300) take flat items up to about 180 x 235 mm, with room to allow for the thickness of the piece inside.

Jewellery Needs Separation Between Pieces

Keep plated and silver pieces apart from bare metal and from each other. Chains tangle, stones scratch softer metal, and a single bag of mixed pieces turns into a knot you'll pick apart over a tray. Wrap delicate chains loosely before bagging, lay them flat rather than coiling them tightly, and choose a bag with a soft inner surface so the piece doesn't abrade as it moves.

For valuable pieces in transit, the bag is only the inner layer of the decision. ECI Jewelers' guidance on insuring valuable jewelry in transit is a useful companion read alongside your packing choices, because protection and cover solve different risks.

Parts and Samples

Sort parts by component family and keep fasteners of different sizes in separate bags. M4 and M5 screws look similar through film at a glance, and separating them now saves you tipping everything out later. Clear film helps, because you can see the contents without opening each bag and wearing the zip.

For samples, don't seal fine powders or liquids in a bag that can't take the pressure. Powder migrates into zip tracks and stops them closing, and liquid finds any weak point in a seal. Use a heat seal where containment matters, and double-bag anything that could leak. Leave a small air gap for fabric or foam samples, since compressing them flat can crease or crush the very texture you're trying to show.

One bag per component group is easier to manage than one large bag holding everything. You use a few more bags, and you lose far less time hunting.

Safety Checks Before You Seal Items

A small bag feels harmless because it is small. That assumption is where people go wrong. A bag that can stretch over a child's face is a suffocation hazard, and the level of risk depends on opening size, closure type, thickness and perforations, not on how flimsy the film looks.

A person holds an open clear plastic bag next to a safety warning note about suffocation hazards.

Treat the Bag as a Piece of Packaging

The UK Packaging (Essential Requirements) Regulations require packaging volume and weight to be limited to the minimum needed to maintain safety, hygiene, and consumer acceptance, and packaging must be designed so it can be reused or recovered with hazardous substances in emissions, ash or landfill leachate minimised. In practice, that means putting the polymer and thickness, seal strength, dimensions, closure type and intended contents on the product specification, instead of ordering a generic bag and hoping it suits everything.

For bags supplied with small parts, textiles or household goods, assess child-suffocation risk directly. Opening size works like a template: a bag that barely admits two fingers behaves very differently from one wide enough to cover a face, so circumference, drawstring closures, material thickness and perforation pattern all belong in the assessment. A warning supports that work, and Adhesive Warning Labels are one way to put it on the outer packaging. A label on its own does not correct a bag that is poorly specified in the first place.

A Screening Baseline for Hazard Assessment

BS EN 71-1, the safety standard designated under the Toys (Safety) Regulations 2011, sets screening values for flexible plastic sheeting: above a specified size it must be thicker than 0.038 mm or perforated so that at least 1% of every 30 mm × 30 mm area is removed, and drawstring bags with an opening circumference above 380 mm require air-permeable material.

Treat those figures as a screening baseline for judging a bag. The applicable standard depends on the product category and on whether the bag accompanies toys or children's products. Bags linked to toys or children's products face stricter checks, so a specification lifted from an adult hardware kit will not transfer safely into a child's product.

A Practical Checklist Before You Seal

  • Confirm opening size: Measure the opening and circumference against your product category, not against a similar-looking bag.
  • Test seal strength: Fill a sample bag with the actual contents, seal it, then pull and drop-test it the way it will be handled.
  • Keep supplier declarations: File the polymer, gauge and any food-contact or safety declarations for that exact film.
  • Record batch traceability: Note the batch so you can identify affected stock if a seal fault appears later.
  • Document the hazard check: Write down why the dimensions and closure avoid creating a foreseeable-use hazard.

Specify each bag around foreseeable misuse as well as intended use. A bag you handle carefully at a workbench may end up in a household drawer, a child's bedroom or a customer's hallway. If that journey is foreseeable, it belongs in the specification.

How to Label and Store Small Seal Bags

A sealed bag you can't identify is only half a system. Labelling takes a few seconds per bag, and it saves you opening ten bags to find one size of screw.

A step-by-step instructional graphic on how to properly label and store items in small seal plastic bags.

Seven Steps That Hold Up Over Time

  1. Decide the label fields before you start. Contents, part or batch number, date sealed and location cover most needs. Deciding first keeps every bag consistent, so you don't end up with some bags showing a date and others showing only a scribble.
  2. Write on a paper insert or a flat area of the bag, not across the seal. Ink on a seal or zip track cracks as the film flexes and can smear when bags rub together. A paper insert also lets you reuse the bag without crossing out old writing.
  3. Use a permanent marker or a printed label. Adhesive labels can peel in cold storage and fade in sunlight, so test one in the conditions you'll use. If you're labelling boxes as well as bags, the principles in choosing labels for moving boxes apply to legibility and placement too.
  4. Press out excess air before sealing. Less trapped air means less crushing when bags are stacked, and small parts shift less inside. Press gently from the base towards the opening so you don't force contents into the zip track.
  5. Colour-code by project or supplier. A coloured dot, insert or label edge lets you spot the right group at a glance. Keep the code simple and write it down, because a colour system only you half remember isn't a system.
  6. Store flat or upright in clear, lidded boxes. Clear sides let you scan without opening the lid, and a lid keeps dust off the seals. Keep boxes away from direct sunlight at a steady room temperature.
  7. Check labels and seals every six months. Replace any bag where the seal has weakened, the zip no longer tracks, or the film has gone brittle. Move the contents and the label together, so the record stays with the parts.

Humidity and Sunlight

Humid spaces need extra help. A sealed box with a suitable desiccant sachet protects metal parts and paper inserts better than bags left loose on a garage shelf, where damp air reaches everything. Keep desiccant away from anything it shouldn't contact, and replace or recharge it as its own instructions require.

Sunlight is the slower problem. Long-term UV exposure makes thin polythene brittle over years, so a bag that felt flexible when you packed it can crack when you pick it up. Store bags out of windows and away from bright display lighting if they're holding stock for the long term. A drawer or lidded box solves both light and dust in one move.

Pick the Right Bag and Check Local Disposal

Choosing a bag is only half the job; the rest is deciding what happens to it once the seal has been opened. A clean, undamaged zip bag can go straight back into service on the next set of parts, while a scored or contaminated one heads for disposal, and knowing which fork a bag sits on saves you repeating the whole selection process.

Disposal Depends on Where You Are

There's no single UK answer to whether a small seal bag belongs in household recycling. The answer depends on location, bag composition and the collection service running in your area, because a plastic that one authority accepts can jam another's machinery. North Yorkshire Council's plastic recycling guidance says plastic bags and film should stay out of household recycling because they can damage sorting equipment, while some local authorities accept clean, single-material soft plastics through designated collection points.

In England, the Simpler Recycling reforms set out a planned start date of 31 March 2027 for plastic film packaging and plastic bags to enter the household recycling stream. Treat that as a documented plan rather than a service you can assume today: dates and local arrangements can shift, so check your council or a supermarket soft-plastic collection point before bags go into a kerbside bin. Advice that's correct in one area can contaminate a whole load in another.

A bag made from a recyclable material isn't necessarily recyclable through your household kerbside system today. Collection infrastructure and contamination rules matter as much as plastic type.

Three Steps Before You Recycle or Bin a Bag

  1. Identify the material. Separate polyethylene bags from mixed-material items and remove any mixed-material closures where you can, because mixed construction complicates sorting.
  2. Empty, clean and dry it. Remove labels, shake out screws or residue, and let the bag dry fully. A dirty or damp bag can contaminate a collection that would otherwise accept it.
  3. Check the route. Confirm whether your council or a local supermarket collection point accepts that format now, and follow that route rather than a general claim printed on a product page.

Reuse comes before disposal where it makes sense. A durable zip bag in good condition can hold the next set of fittings, cables or instruction sheets, and we sell bubblewrap bags and pouches alongside options such as Biodegradable Bubble Wrap for readers comparing protective formats. Skip reuse for bags contaminated with chemicals, mould, food residue or sharp contents that have scored the film, because there's no reliable way to make them clean and sound again. Recyclable materials are used across our boxes, wraps and packing kits, yet a material claim still needs a real collection route behind it.

Finally, if you buy bags as packaging for products you sell, ask about recycled content and evidence. The government guidance on registering for Plastic Packaging Tax states that packaging components containing at least 30% recycled plastic are not chargeable to the tax, and businesses must keep evidence supporting claimed recycled content, otherwise plastic packaging is treated as containing virgin plastic. Ask your supplier for that evidence in writing, alongside the polymer and gauge, so your specification covers performance, safety and end of life in one record.


If you're packing small parts, documents or fragile items for a move, storage or posting, we stock bubble pouches and bags, bubble wrap rolls, boxes, labels and protective packing materials that sit alongside the small seal bags covered here. Browse the range and match each format to the item you're protecting at Storage & Removal Boxes Ltd.